A small dry ice blasting machine is a compact, eco-friendly cleaning device that uses compressed air to accelerate solid dry ice pellets at high speed. The pellets sublimate immediately on impact, lifting dirt, grease and contaminants without leaving any secondary waste. Unlike traditional water jet or chemical cleaning methods, it requires no drying time and causes no damage to delicate equipment surfaces. This technology has become the preferred cleaning solution for industries that demand high hygiene standards and minimal production downtime. YG offers four standard models of small dry ice blasting machines ranging from ICE-JET 3.0 to ICE-JET 40, covering 3 kg to 40 kg dry ice capacity and 20-100KG/H consumption rates. Each model is optimized for different cleaning scenarios, from small spot repairs to large-area industrial cleaning. Below are two real application cases from Mexico and Spain that demonstrate the practical performance of our equipment in actual working environments.
Small Dry Ice Blasting Machine Parameters
| Model | ICE-JET 3.0 | ICE-JET 6.0 | ICE-JET 15 | ICE-JET 40 |
| Dry Ice Capacity | 3KG | 6KG | 15KG | 40KG |
| Dry lce Consumption | 20-50KG/H | 20-50KG/H | 30-100KG/H | 30-100KG/H |
| Supply Pressure | 3-10bar | 13-10bar | 3-10bar | 3-10bar |
| Air Consumption | 1-2m³/min | 1-3m³/min | 1-4m³/min | 1-5m³/min |
| Weight | 40KG | 50KG | 65KG | 80KG |
| Dimensions | 460x340x750mm | 460x350x850mm | 550x445x985mm | 650x550x1000mm |
| Total Power | <500W | <800W | <800W | <800W |
Small Dry Ice Blasting Machine Real Cases In Mexico And Spain
Case 1: Small Dry Ice Blasting Machine For Food Processing Plant In Mexico
Client Background & Core Demand: Local small-scale food processing plant in Mexico specializing in baked goods production. The plant needed regular cleaning of its industrial ovens, conveyor belts and mixing equipment. The main challenges included:
- Strict food safety regulations prohibit any chemical residue on production equipment
- Limited downtime for cleaning, with only 4 hours available per maintenance shift
- Traditional water cleaning caused rust on metal surfaces and required 24 hours of drying time
- Need for a portable device that could move between different production lines easily
YG Targeted Matching Solution: We recommended the ICE-JET 6.0 small dry ice blaster for this project. Its 6KG hopper capacity and 20-50KG/H consumption rate perfectly matched the 4-hour maintenance window. The 50KG lightweight design allowed a single operator to move it between production lines without additional lifting equipment. Its adjustable 3-10bar supply pressure could be tuned for both heavy grease removal on ovens and delicate cleaning of sensor components.
Client Practical Feedback: The small dry ice blaster machine completed the full cleaning of 3 production lines in just 2.5 hours, 37% faster than the original water cleaning method. No chemical residue was left on any equipment surface, and all parts passed the local food safety inspection immediately after cleaning. The plant manager noted that the elimination of drying time allowed them to resume production 20 hours earlier per maintenance cycle, resulting in significant productivity gains. They have since scheduled monthly cleaning sessions using the same equipment.
After three months of consistent use, the client purchased a matching dry ice pelletizer to pair with their small dry ice blasting machine. This eliminated their reliance on third-party dry ice suppliers, reduced material waste by 25% and allowed them to produce fresh pellets on demand for emergency cleaning tasks. They now have a fully self-sufficient cleaning system that operates entirely on their own schedule.
Case 2: Dry Ice Car Cleaning Machine For Automotive Paint Shop In Spain
Client Background & Core Demand: Local automotive parts manufacturing plant in Spain operating a medium-sized spray paint booth. The booth required monthly cleaning to remove accumulated paint overspray and dust from walls, floors and ventilation ducts. The main challenges included:
- Paint overspray adhered tightly to metal surfaces and was difficult to remove with manual scraping
- Traditional sandblasting damaged the booth’s protective coating and created hazardous dust
- Water cleaning produced large amounts of contaminated wastewater that required expensive disposal
- Need for a cleaning method that would not require full booth disassembly
YG Targeted Matching Solution: We provided the ICE-JET 15 dry ice car cleaning machine for this application. Its 15KG hopper capacity and 30-100KG/H consumption rate allowed continuous cleaning for extended periods. The adjustable pressure setting could remove thick paint buildup without damaging the underlying booth coating. The 65KG weight with compact dimensions made it easy to maneuver inside the confined space of the paint booth.
Client Practical Feedback: The machine cleaned the entire 200-square-meter paint booth in 6 hours, compared to the 3 days required for the previous manual scraping method. No damage was observed on the booth’s protective coating, and no secondary waste was generated except for the removed paint particles. The plant estimated that they saved over €2,000 per cleaning cycle by eliminating wastewater disposal costs and reducing downtime. They have now replaced all their traditional cleaning methods with dry ice blasting technology.
Dry Ice Blaster Machine For Sale
A reliable small dry ice blasting machine is a versatile investment that can transform your cleaning operations and open up new revenue streams. Whether you need a compact unit for occasional spot cleaning or a heavy-duty model for daily industrial use, we have the right solution for you. If you are looking for a high-quality dry ice blaster machine for sale, contact our team today. We will assess your specific cleaning requirements and provide a customized quotation tailored to your needs. All our machines come with comprehensive operation manuals and technical support to ensure you get the most out of your investment.
