A concrete brick making machine processes raw materials like fly ash, stone powder, sand and cement to produce non‑fired building bricks without high‑temperature kiln baking. Finished bricks only need short‑term air drying before delivery to construction markets. This equipment cuts reliance on polluting clay brick production and supports solid‑waste recycling for building projects. YG Machinery supplies flexible solutions covering semi‑auto units to full production lines, with the popular YG‑QT4‑15 model delivering 8000‑10000 pieces of output each working day.
Core Parameter Snapshot for Concrete Brick Making Machine
YG‑QT4‑15 Unit Basic Specs
| Model | YG-QT4-15 |
| Power | 27.2KW |
| Molding cycle(second) | 15S |
| Capacity | 4-7 bricks each mold/time |
| Daily output | 8000-10000pcs |
| Forming method | Hydrauliquement |
| Pression nominale | 16Mpa |
| Transmission mode | Vibration transmission |
| Dimension(mm) | 5900*2200*2400 |
| weight | 2100KG |
Output Reference For Common Brick Types
| Block Name | Size (L*W*H)mm | Molding Cycle | QTY/Mould | QTY/hour | Qty/8hr |
| Hollow block | 400*200*200 | 15-20s | 6pcs | 1080-1440pcs | 8640-11520pcs |
| Hollow block | 400*150*200 | 15-20s | 7pcs | 1260-1680pcs | 10080-13440pcs |
| Hollow block | 400*100*200 | 15-20s | 11pcs | 1980-3640pcs | 15840-21120pcs |
| Porous block | 240*115*90 | 15-20s | 15pcs | 2700-3600pcs | 21600-28800pcs |
| Standard brick | 240*115*53 | 15-17s | 30pcs | 6300-7200pcs | 50400-57600pcs |
| Paver | 225*112.5*60 | 20-25s | 15pcs | 2160-2700pcs | 17280-21600pcs |
Note: Production data depends on raw‑material quality, operator skill and stable power supply.
4 Key Business Benefits for Automatic Brick Machine
Switching from manual brick production to mechanical equipment brings measurable improvements on your project timeline and workforce arrangement.
- It greatly speeds up your whole production cycle. You finish more finished brick stock within each shift and meet large‑volume orders without extended lead times.
- Fewer on‑site operators handle the full manufacturing flow. You free up labour resources to focus on raw‑material preparation and finished‑goods delivery.
- Consistent brick dimensions lower on‑site construction rework risk. Every batch keeps uniform size and density, so builders avoid fitting errors during wall or pavement installation.
- The concrete brick making machine accepts local industrial waste materials as feedstock. You source affordable local materials and follow local environmental rules for non‑fired brick manufacturing.
Technical Highlights of Block Brick Making Machine
- Power flows from the main motor through the belt pulley, reducer and gear set; then crank‑linkage converts rotary motion into vertical beam movement for feeding, pressing and brick ejection cycles.
- For structural performance, key load‑bearing frames adopt thick steel plate welding. Every welded joint goes through visual inspection and stress relief treatment before assembly.
- All hydraulic components pass pressure testing at 1.2 times nominal working pressure to prevent oil leakage under continuous shift operation. Before factory shipment, each block brick making machine runs continuous cycle testing to verify feeding speed, mold alignment and product ejection performance.
- Custom‑built molds use wear‑resistant alloy steel. These hardened mold surfaces hold precision dimensions after thousands of production cycles.
- The concrete brick making machine supports voltage adjustment. Engineers modify internal electrical components to match local three‑phase power specifications for different regional markets.
FAQ About Industrial Brick Making Machine
A: With swapped molds, the machine manufactures hollow blocks, porous bricks, standard solid bricks, colored paving bricks and special interlocking blocks. We support custom mold fabrication for special brick dimensions.
A: No. This is non‑fired brick production gear. Completed bricks gain strength through natural air‑drying instead of high‑temperature firing. You need covered storage space for fresh‑pressed bricks during the curing period.
A: Yes. Our technical team adjusts electrical elements to fit your local three‑phase voltage and frequency requirements before delivery. Please share your local power parameters during the early inquiry.
A: Fly ash, mine slag, crushed construction waste, stone powder, gravel, sand, and cement all work as qualified input materials. You test local material samples to fine‑tune mixing ratios.
YG Machinery Manufacturer Introduction
YG Machinery founded in 2005, focuses on construction machinery R&D and manufacturing, with products supplied to over 100 countries and regions across the globe. Our block‑making product portfolio ranges from cost‑effective semi‑automatic units to complete automatic brick machine production lines. We offer mold customization and pre‑shipment running tests for every order.
If you plan to expand your brick‑making capacity or buy a concrete brick making machine, send us your requirements including target brick sizes, expected daily output, and local power situation. Our technical team will prepare a tailored solution for your project.
